How To Exam?

a knowledge trading engine...


North Maharashtra University 2008 B.Sc Computer Science FY 1 - Question Paper

Monday, 04 February 2013 02:00Web


FYBSC (Computer Science) Paper 1

Question Bank F.Y.B.Sc. Computer Science

Paper -I Fundamentals of Computer

&

Computer Organization and Architecture.

UG-CS 101

Multiple Choice : 160 Objective    :182

2 Mark Questions : 223 4 Mark Questions : 200 6 Mark Questions : 116

Question 1 Multiple Choice

1)    The access method used for magnetic tape is_

a) Direct b) Random c) Sequential d) None of the above

2)    By Processing we understand_

a) Processing string of only words b) None of the above c) String manipulation only

d) Processing string of numbers and special symbols

3)    The difference between memory and storage is that the memory is_ and

storage is_

a) Temporary, permanent b) Permanent, temporary c) Slow, fast

d) None of the above

4)    Which of the Following holds the ROM, CPU, RAM and expansion cards a) Hard disk b) Floppy disk c) Mother board d) None of the above

5)    The language that the computer can understand and execute is called_

a) Machine language b) Application software c) System program

d) None of the above

6)    Which of the following devices can be used to directly input printed text a) OCR b) OMR c) MICR d) None of the above

7)    A floppy disk contains

a) Circular tracks only b) Sectors only c) Both circular tracks and sectors

d) None of the above

8)    CD-ROM is a

a) Semiconductor memory b) Memory register c) Magnetic memory

d) None of the above

9)    Actual execution of instructions in a computer takes place in

a) ALU b) Control Unit c) Storage unit    d) None of the above

10)    Which of the following is used as a primary storage device

a) Magnetic tape b) PROM c) Floppy disk    d) None of the above

11)    Information retrieval is faster from

a) Floppy disk    b) Magnetic tape c) Hard disk d) None of the above

12)    Operating system is

a)    A collection of hardware components c) A collection of software routines

b)    A collection of input-output devices d) none of the above

13)    Operating system

a)    Link a program with the subroutines it references

b)    Provides a layered, user-friendly interface

c)    Enables a programmer to draw a flowchart d) None of the above

14)    Execution of two or more programs by a single CPU is known as :

a) Multiprocessing    b) Time sharing    c) Multiprogramming

d)    None of the above

15)    Modem stands for

a) A type of secondary memory b) Modulator demodulator

c) Mainframe operating device memory d) None of the above

16)    Typical data transfer rate in LAN are of the order of

(a) Bits per sec (b) Kilo bits per sec (c) Mega bits per sec (d) None of the above

17)    Ethernet uses

(a) Bus topology (b) Ring topology (c) Mesh topology (d) None of the above

18)    Wide area networks (WANs) always require

(a) High bandwidth communication source link (b) High speed processors

(c)    Same type    (d) None of the above

19)    Typical bandwidth of optical fibers is

(a) Order of GHz    (b) Order of KHz

(c) Order of Hz    (d) None of the above

20)    A large number of computers in a wide geographical area can be efficiently connected by

(a) Twisted pair lines (b) Coaxial cables (c) Communications satellites

(d)    None of the above

21)    Which of the following topologies is not of broadcast type ?

(a) Star (b) Bus    (c) Ring (d) None of the above

22)    Bug means

(a) A logical error in a program (b) Documenting programs using an efficient Documentation too (c) A difficult syntax error in a program (d) None of the above

23)    The part of machine level instruction, which tells the central processor what was to be Done is

(a) Operation code    (b) Address    (c) Operand (d) None of the above

24)Indicate    which , of the following is not true about 4GL.

a)4GL    does not support a high -level of screen interaction

b)Many    database management system packages support 4GLs

c)A    4GL is a software tool which is written, possibly, in some third generation language

d)None    of the above

25)    Indicate which of the following, best describes the term software a)Systems programs only b)Application programs only c)Both (a) and (b)

d)None of the above

26)    A translator is best described as

a) An Application software b) A system software c) A hardware component

d)None of the above

27)    Indicate which of the following is not true about an interpreter

a)Interpreter    generates an object program from the source program

b)    Interpreter is a kind of translator

c)    Interpreter analyses each source statement every time it is to be executed

d)    None of the above

28)    The errors that can be pointed out by the compiler are

a)Syntax errors b)Semantic errors c)Logical errors d)None of the above

29)    C is

a) An assembly language b) A third generation high level language

c) A machine language d)None of the above

30)    A graph preapared by a computer

a) is its output b) is the piece of information to use c)is a hard copy

d) all of the above

31)Which    of the following does not represent on I/O device

a) speaker which beeps b) joystick c) plotter d)ALU

32)The    communication line between the CPU, memory and peripherals is called a a)Bus b) line c)media d) none of these

33)Memories    which can be read only are called..............memories

a)RAM b)ROM(read only memory)    c)PROM

d)EPROM

34)Example    of non-numerical data is

a) Employee address    b) Examination score    c)Bank balance

d)None of the above

35)One    thousand bytes represent a

a)Megabyte    b)Gigabyte c)Kilobyte d)None of the above

36)The    language that the computer can understand and execute is called

a)Machine language    b)Application software c)System program

d)None of the above

37)A    step by step procedure used to solve a problem is called

a)Operating system b)Algorithm c)Application Program d)None of the above

38)Which    of the following holds the ROM, CPU, RAM and expansion cards a)Hard disk b)Cache memory c)Mother board d)None of the above

39)The    errors that can be pointed out by the compiler are

a)Syntax errors b)Semantic errors c)Logical errors d)None of the above

40)A    computer cannot boot if it does not have the

a)Compiler    b)Loader    c)Operating system d)Assembler

41)WAN    hardware includes

a)Multiplexors and routers b)EDF    c)Bridger and modems

d)None of the above

42)Third    generation computers

a)Were    the first to use built-in error detecting device

b)Used    transistors instead of vaccum tubes

c)Were    the first to use neural network

d)None    of the above

43)A    Winchester disk is a

a)Disk stack b)Removable disk c)Flexible disk d)None of the above

44)    A computer can be defined as an electronic device that can be(choose the most precise definition):

a) carry out arithmetical operation    b) carry out logical function

c)    accept and process data using a set of stored instructions

d)    present information on a VDU

45)    The Central Processing Unit:

a) is operated from the control panel. b) is controlled by the input data entering the system

c) controls the auxiliary storage unit d) controls all input, output and processing.

46) Computer follows a simple principle called GIGO which means:

a)garbage input good output    b) garbage in garbage out

c) great instructions great output    d) good input good output.

47)    The term baud is a measure of the:

a)    speed at which data travels over the communication line

b)    memory capacity

c)    instruction execution time

d)    all of the above

48)    A bootstrap is:

a) a memory device    b) a device to support the computer

c)    a small initialisation program to start up a computer

d)    an error correction technique

49) Which of the following is not hardware:

a) Magnetic tape b) Printer c) VDU terminal d) Assembler

50)    Pick out the wrong definition :

a)    Access time - time needed to access the output

b)    EDP- acronym for Electronic Data Processing

c)    COBOL - a language used for business data processing

d)    Control unit - heart of a computer.

51)    Terminal is a:

a)    device to give power supply to computer

b)    point at which data enters or leaves the computer

c)    the last instruction in a program

d)    any input /output device.

52)    Multiple choice examination answer sheets can be evaluated automically by

a) Optical Mark Reader b)Optical Character Reader c) Magnetic tape reader

e)    Magnetic ink character reader.

53)    An operating system

a) is not required on large computers b) is always supplied with the copmuter

c) is always supplied with the BASIC

e)    consists of programs that help in the operation of computer.

54)Which    of the following would cause quickest acess

a)    direct access from a magnetic tape

b)    direct access from a hard disk

c)    direct access from a floppy disk

d)    direct access from a cassette tape

55) The process of retaining data for future use is called a) reading b)writing c)storing d)coding

55)A    file is corrected immediately after the input of a transaction.This is an example of

a) sorting b)batching c)on-line updating d) off-line updating

56)Magnetic    tapes are good storage media for

a)    backup and low volume data

b)backup    and high volume data

c)storing    original but low volume data

d)storing    original but high volume data

57)Which    of the following is a computercode

a) EPROM b) JAVA c) EBCDIC d)None of the above

58)Data    is generally coded in 8-bit units, such a unit is also called a) k b) Word c)field    d)byte

59) Half adder is logic CKT that adds..........Digit at a time

a) Two b) one c) three    d) zero

60)    Half adder consist of.......&.....Gates

a) EX-OR&AND b) EX-OR&OR

c) EX-OR&NOT    d) None of this

61)In    half adder EX-OR gate O/P is............

a) Carry b) Remainder c) Sum    d) Non of this

62)In    half adder AND gate O/P is............

a) Carry b) Reminder c) Sum    d) Non of this

63)Subtract    ( 1010)2 from ( 1101 )2 using 1st complement.. a)(1100)2 b)(0011)2 c)(1001)2 d)(0101)2

64)Using    2s Complement, subtraction, of (1010)2 from (0011)2 is a) (0111)2 b) (1001)2 c) -(0111)2 d) -(1001)2

65)In    1st Complement a number to be subtracted is known as.........

a) Subtrahend b) Minuend c) carry d) none of thi

66)In    1st Complement a number which is Subtracted from other number Is known as..........

a) Carry b) subtrahend    c) minuend d) Non of this

67)In    a 2nd Complement a number which is subtracted from other Number is known as...........

a) Carry b) Subtrahend    c) Minuend d) Non of this

68)In    2nd Complement a number which is subtracted from other number Is known as.............

a) Carry b) Subtrahend    c) Minuend d) Non of this

69)The    full adder CKT adds..........Digit at a time

a) 1 b) 2 c) 3 d) 4

70)Full    adder is constructed by using................

a) Two Half Adder& one OR gate b) two OR gate &one HA

c) One HA & two OR gate d) One OR gate & one HA

71)HA    gives................O/P

a) 1 b) 2 c) 3 d) non of this

72)FA    gives...........O/P

a) 1 b) 2 c) 3 d) non of this

73)    The O/P of Half adder is in the form of.

a) Sum b) carry c) sum & carry d) none of these

74)The    O/P of Full adder is in the form of............

a) Sum b) carry c) sum & carry d) none of these

75.)..........Are used for converting one type of number system in to other form.

a) Encoder b) logic gate c) half adder d) FA

76 ).........Are used for converting one type of number system in to the other form

a)    Decoder b) logic gate c) half adder d) Full adder

77)Multiplexer    means..............................

a) One in to many b) many in to one c) many in to many d) none of these

78)Multiplexers    is also known as.

b)    mux b) demux c) adder d) subtractor

79)ASCII    code is a......... bit code.

a) 1 b) 2 c) 7 d) 8

80)8421    codes is also called as.

a) Gray code b) ASCII code c) excess 3-code d) BCD code

81)The    decimal number is converted in to excess 3 codes by adding. to each decimal digit.

a) 4 b) 8 c) 2 d) 3

82)The    binary system, 1+1=............

(a) 2 (b) 0 (c) 1 (d) none of these

83)110+110 =............

(a) 2 (b) 0 (c) 1 (d) none of these

84)    12+12=...........

(a) 2 (b) 0 (c) 1 (d) none of these

85)    The digital system usually operated on.........system.

(a) binary (b) decimal (c)octal (d) hexadecimal

86)    The binary system use powers of..........for positional values.

(a) 2 (b)10 (c) 8 (d)16

87)    After counting 0, 1, 10, 11, the next binary number is

(a) 12 (b) 100 (c)101 (d) 110

88)    The 2s complement of 10002 is

(a)0111 (b)0101 (c) 1000 (d)0001

89)    The chief reason why digital computers use complemental subtraction is that is

(a) simplifies their circuitry (b) is a very simple process

(c) can handle negative numbers easily (d) avoids direct substraction

90)    In logic algebra, variables can assume only two values:either..........or 1.

(a) 2 (b) 0 (c) 3 (d) 4

91)    The..........gate is also called any-or-all gate.

(a) OR (b) AND (c) NOT (d) EX-OR

92)    In a 2-input OR gate, output is 0 if and only if..........input are 0.

(a)

93)    A logic gate is an electronic circuit which

(a) makes logic decisions (b) allows electron flow only in one direction (c) works on binary algebra (d) alternates between 0&1 values

94)    In positive logic, logic gate 1 corresponds to

(a) positive voltage (b) higher voltage level (c) zero voltage level (d) lower voltage level

95) In negative logic, the logic state 1 corresponds to (a) negative logic (b) zero voltage (c) more negative voltage (d) lower voltage level

96)    The output of a 2-input OR the gate is 0 only when its

(a) both inputs are 0 (b) either input is 1 (c) both inputs are 1 (d) either input is 0

97)    An X-OR gate produces an output only when its two inputs are

(a) high (b) low (c) different (d) same

98)    An AND gate

(a) implements logic addition (b) is equivalent to a series switching circuit

(c) is an any-or-all gate (d)is equivalent to a parallel switching circuit

99)    When an input electrical signal A=10100 is applied to a NOT gate, its output

Signal is

(a) 01011 (b) 10101 (c) 10100 (d)00101

100)    The only function of a NOT gate is to

(a) stop a signal (b) recomplement a signal

(c) invert an input signal (d) act as a universal set

101)    A NOR gate is ON only when all its inputs are

(a) ON (b) positive (c) high (d) OFF

102)    The truth table as shown in fig.

Is for a/an......gate.

A

B

C

0

0

0

0

1

1

1

0

1

1

1

1

JD (d

) NANI

D (e)

(a) XNOR (b) OR (c) AN

103) For getting an output from an XNOR gate, its both inputs must be

(a) high (b) low (c) at the same logic level (d) at the apposite logic level

104)    Karnaugh map (K-map) technique provides a systematic method for simplifying

a) multiplexers b) lgic gates c) Boolean expressions d) none of these .

105)    K-map technique generally used up to --------Variables

a) 2 b) 8 c) 7 d) 6 .

106)    The K-map eqn for following truth table is-----

A

B

Y

0

0

0

0

1

0

1

0

1

1

1

1

a) AB+AB b) AB +AB    c) AB+AB    d)None of this .

107) The K-map for following truth table is

A

B

Y

0

0

0

0

1

0

1

0

1

1

1

1

a)    b)    c)

B

B

A

0

1

A

1

0

d)None of these

B

B

A

1

1

A

0

0

B

B

0

0

A

A

1

1


108)This is K-map For---------Variables

B

B

A

0

1

A

1

0

a) 1 b) 2 c) 3 d) 4

109)

Variables


C

C

AB

1

1

AB

0

1

AB

1

0

AB

1

0

This is K-map for a)10 b)6 c) 3 d) 8

110) The K-map for AB+AB is

c)


a)    b)

B

B

A

0

A

1

1

B

B

A

0

1

A

0

1

111)In    K-map a quad is group of---------1s

d) None of these .


a) 2 b) 6 c) 4 d) 8

112)    A octal is group of-------1s

a) 2 b) 6 c) 4 d) 8

113)    K -map for Half adder is of----------Variables

a)2 b) 3 c) 4 d) None of these

114)K-map for Full adder is of-----------Variables

a) 2 b) 3 c) 4 d) None of these

115)    A Register is a group of---------

a) OR gates b)OR & AND gate c)Flip-flops d)None of these

116)    Each Flip-flop stores---------- bits

a) 1 bit B) 8 bit    c) 16 bit d)2 bit

117)This    is truth table for----------gate

A

B

Y

0

0

0

0

1

1

1

0

1

1

1

0

a)OR gate b)AND gate

c)NAND gate d)EX-OR gate 118)This is truth table for ------------- gate

A

B

Y

0

0

0

0

1

0

1

0

0

1

1

1

a)OR gate b)AND gate

c)NAND gate d)EX-OR gate

118) This is truth table for ------------- gate

A

B

Y

0

0

1

0

1

1

1

0

1

1

1

0

a)OR gate b)AND c)NAND gate d)NOR

119)    In Boolean algebra , A+ A= -----------

a)A    b)1    c)0    d)None of these

120)    In Boolean algebra , A . A=-----------

a) A2    b) A    c)2A    d)1

121)    In Boolean algebra A+ AB =-----------

a) B    b) A    c)AB    d)A+B

122)The    First Microprocessor was_

a) Intel 4004 b) 8080 c) 8085 d) 4008

123)8085    was introduced in_

a) 1971 b) 1976 c) 1972 d) 1978

124)In    1978 Intel introduced the 16 bit Microprocessor 8086 now called as_

a) M6 800 b) APX 80 c) Zylog z8000 d) Intel 8086

125)Which    is a 8 bit Microprocessor_

a) Intel 4040 b) Pentium - I c) 8088 d) Motorala MC-6801

126)Pentium-I,    Pentium-II, Pentium-III and Pentium-IV are recently introduced microprocessor by_

a) Motorala b) Intel c) Stephen Mors d) None

127)The    address bus flow in_

a) bidirection b) unidirection c) Mulidirection d) Circular

128)Status    register is also called as_

a) Accumulator b) Stack c) Counter d) flags

129)The    8085 is based in a_pin DIP

a) 40 b) 45 c) 20 d) 35

130)The    8085 Microprocessor uses_V power supply

a) +5V b) -5V c) +12v d) -12v

131)The    address / data bus in 8085 is_

a) Multiplexed b) demultiplexed c) decoded d) loaded

132)The    Stack pointer holds_

a) 16 bit address b) 16 bit data c) 8 bit address d) 8 bit data

133)The    First electronic computer was completed in_

a) 1946 b) 1938 c) 1941 d) 1950

134)The    First Generation of computer appeared during the period_

a) 1945 to 1954 b) 1964 to 1974 c) 1934 to 1944 d) 1937 to 1949

135)The    Second Generation of computers used_

a) IC-Chip b) Transistors c) Vaccum tubes d) Microprocessor chip

136)The    fourth Generation began in_

a) 1974 b)1935 c)1965 d)1975

137_)_is used to create Large program on internet

a) C++ b) HTML c) C language d) Java script

138)The    Device which converts instructions into the binary form that is understood by the computer and supply to the computer is known as_

a) Input b) Output c) Automatic d) Memory

139)Laptop    PCs are also known as _Computers

a) Mainframe b) Super c) Notebook d) personal

140) _is a_symbol

a) Processing b) Terminal c) Input/ Output d) decision

141)The symbol is used to indicate a point at which decision has to be made_ a) Connector b) decision c) processing d) Terminal

142)Windows    98 is_

a) Graphics System b) Operating System c) Drawing system d) Processing system

143)A    common topology to any network is_topology

a) Bus b) Star c) Tree d) Ring

144)A    flip flop has_stable status

a) Two b) Three c) four d) five

145)Flip    flop is also called as_

a) Stable b) bistable c) Tri stable d) not stable

146)The    number system that we use in our day to day life is called the Number System_

a) Octal b) Binary c) hexadecimal d) Decimal

146)The    Binary system has base_

a) 8 b) 2 c) 10 d) 16

147)The    Octal Number system has base_

a) 2 b) 10 c) 8 d) 10

148)The    Decimal Number system has base_

a) 10 b) 8 c) 16 d) 2

149)The    Hexadecimal Number system has base_

a) 2 b) 10 c) 16 d) 8

150)110100112=    ? 16

a) D316 b) A316 c) B316 d) D216

151)25?    10= ? 2_

a) 100012 b) 110012 c) 110002 d) 101012

152.Binary    equivalent of decimal 8 is a. 111 b. 1001 c. 1000 d. 10001

153.What    will be the decimal equivalent of (111011.10)2 a. 48.625 b. 59.487 c. 48.487 d.59.625

154.What    will be the hexadecimal equivalent of decimal number (54977) a. D6C1 b. DC61 c. D6C5 d. none

155.What will binary equivalent of (24.1875)10 a. (11100.0011) b. (11001.0101) c. (10110.0011) d. None.

156.Which    of the following is not an octal number? a. 44 b. 29 c.6632 d.74

157.Hexadecimal    number system has.....symbols.

a. 15 b.12 cJ6 d.10

158.Octal number system has.....symbols.

a. 15 b.16 c8 d.10

159.Binary    number system has.....symbols.

a. 15 b.16 c2 d.10

160.Decimal    number system has.....symbols.

a. 15 b.16 c.2 d.10

161.The    octal equivalent of (13)10 is a. 18 b. 14 cJA d. 16

162.Convert    decimal number (100)10 to octal equivalent will give A. 100 b.120 c.144 d.154

163.Hexadecimal    equivalent of (58)10 will be a. 72 b.111010 c.3A d.3C

164.The    result after converting binary number(100011)2 to decimal will be a. 30 b.43 c.35 d. None

165.The    decimal equivalent of sum of two binary numbers is (1010101)2 and (1001010)2

a. 300 b. 200 c.326 d.226

166.Conversion    of hexadecimal number (69)16 to octal equivalent will give a. 451 b. 351 c. 251 d.151

167.Converting    binary number (100110)2 to hexadecimal equivalent will give a. 46 b.36 c26 d.34

168.The    difference between two decimal numbers 87 and 63 in binary format will be : a. 10100 b. 11000 c.10010 d. None

169.The    sum of two hexadecimal numbers (37) and (63) will be :

a. 100 b.9A c.45 d.8A

169.The    sum of octal numbers (25)8 + (52)8 +(33)8 is : a. (90)10 b.(132)8 c.(5A)16 d All above.

170.What    are the essential feature of any number system? a. Operators b Radix c. Base d. b and c.

171.The    binary equivalent of (64)10 is :

a. 11000000 b. 1100000 c. 1000000 d. 1100010

172.The    binary equivalent of octal number (43)8 a. 11000 b.11111 c. 10011 d.10111

173.(72)10    is equivalent to :

a. (108)8 b. (27)8 c. (F3)8 d. (110)8

174.Find    complements of the following numbers : a. 10 b. 101 c. 101101 d. 011011 175.Subtract 0110111 from 1101110

333. Subtract 01110 from 10101.

176.Logic    gate is electronic circuit which makes-i) Logical decision ii) Boolean algebra

177.    Which gate has only one input and only one output. i) NOT Gate

178.    In positive logic system, positive voltage level (LOW) represents... i) Logical 1 state ii) Logical o state

179.    In positive logic system,Most Negative voltage level (LOW) represents

-    Logical 0 state

180.    In Negative logic system - most positive voltage level (High) represents

-    Logical 0 state

181.    In Negative logic system ,Most Negative voltage level (LOW) represents

-    Logical 1 state

182.    Draw symbols of OR gate

183.    Draw symbols of AND gate

184.    Draw symbols of NOT gate

185.    Draw symbols of NOR gate

186.    Draw symbols of NAND gate

187.    Draw symbols of Ex-OR gate This logical expression

188)    Y=A+B is of_gate.

189)    Y=A.B is of_gate.

190)    Y=A is of_gate.

191)    Y=A+B is of_gate.

192)    Y=A.B is of_gate.

193)    Y=A.B+A.B is of_gate.

Options: i) OR ii) AND iii) NAND iv) NOR v) Ex-OR vi) NOT

194 )_gate is also called as inverter.... NOT

195 )_&_gate are universal building block.

i) NAND & NOR II) AND & OR iii) EXOR & OR iv) AND & NAND

196.    The two input OR gate will always give the output zero when :

a.both the inputs are 1. b. both inputs are zero c. any one input 1 d. any one 0

197.    A NOR gate is OFF when .

a.all its input are ON b. all its input are OFF c. either of its input is OFF d. a and c

198.    What is the main function of NOT gate

a.It has no effect b. It act as Universal gate c. to invert an output signal d. None.

199.    In this adder, the bits of the operand are added one after another : a.Half adder b. Half Duplex c. Serial adder d. Parallel adder

200.    The NOT symbol at the output of an OR gate :

a. Converts it into AND gate b. Converts it into NAND gate

c. Converts it into XOR gate d. Converts it into NOR gate

201.    This gate transmits 1 through it, only if neither of its terminals receives a pulse . What is its name?

a. NOR b. NOT c. AND d. OR

202.    Pictorial representation of Boolean algebra is known as

a. Venn Diagram b. Flow Chart c. Data Flow Diagram d. Truth Table.

203.    The three logical operations , which are said to be logically complete, as any Boolean function may

be realized using these three operations are :

a. AND,OR and NOT b. AND,OR and XOR c. AND,OR and NAND d. XOR,NOR,and NAND.

204.A    full adder :

a.adds 2 bits fed to it b. adds 3 bits fed to it c. adds 2 bits fed to it and produces sum and carry bit

d. adds 3 bits _ fed to it and_produces sum and carry bit

205.When    an input signal 110010 is applied to a NOT gate, it generates the output: a. 110010 b. 001110 c. 001101 d.111111

206.Boolean    algebra invented by - Scientist

-    George Bool

207.Boolean    algebra can be used for

-    Simplifying the design of logic circuit

208.Binary    1 represents

-    HIGH Level

209.Binary    0 represents

-    LOW Level

210.Define    OR Laws of Boolean algebra

-    A+1=1, A+0=A, A+A=A, A+A=1

211.Define    AND Laws of Boolean algebra.

-    A.1=A, A.0=0, A.A=A, A+A=0

212.Define    Commutative Laws of Boolean algebra.

-    A+B=B+A A.B=B.A

213.Define    NOT Laws of Boolean algebra

214.    Define Associative Laws of Boolean algebra.

-    A+(B+C)=(A+B)+C

A-(B-C)=(A-B)-C

215.    Define Distributive Laws of Boolean algebra.

-    A+BC=(A+B)(A+C)

A.(B+C)=A.B+A.C

216.    Define Absorption Laws of Boolean algebra.

-    A+AB=A

A(A+B)=A+B

A+AB=A+B

217.    Arithmetic rules for binary Addition

-    0+0=0, 0+1=1, 1+0=1, 1+1=0

218.    Arithmetic rules for binary Subtraction

- 0-0=0, 0-1=1, 1-0=0, 1-1=0

219.    What is 1s complement?

220.    What is 2s complement?

221.    Symbol of Half Adder?

222.    Symbol of Full Adder?

223........Is the name of the logic circuit which can add two binary digits.

a. Buffer b.RAM c. Half Adder d. Full Addrer 224. An AND gate :

a. is used to implement logic addition b. is same as parallel switching ckt.

c. is same as serial switching ckt. d. None

225)    Output Of Digital Circuit- input

226)    Device or Circuit whose output will remain unchanged once set

1)FilpFlop

2)gate

3)Boolean    Algebra

227)    FilpFlop is

1)Unstable 2)Prestable

228)    Symbol of RS FilpFlop

229 )--------------is the process of transmit a large number of information over a single

Line.

230 )--------------is also called data selector.

231)    What is Multiplexer..

232)Multiplexer    means many to one

233)Demultiplexer    means one to many

234)Draw    symbol of Multiplexer..

235)What    Is data selector

236)    What is Demultiplexer..

237)    Draw symbol Demultiplexer

238)What    is Encoder

239)    What is application of Encoder

240)Taking    information from one input and transmit the same over one of several called Demultiplexer.

241)The    main feature of integrated circuit is :

a. its complicated circuit b. Its cost , which is very high

_c.Its size, it is _ fabricated on small square or rectangle shape silicon chip.

d. It cannot be reapaired

242.    Why registers are used?

243.    Why memory is used?

244.    What is Word.

245.    What is function of Read / write signal in memory.

246.    What is MBR.

247.    What is address of word.

248.    Where address of word is stored.

249.    What is destructive memory cell. With example.

250.    What is non-destructive memory cell, with example.

251.    Define Access time of memory

252.    Define Write time of memory

253.    Define Memory cycle time of memory

254.    Define Cycle time of memory

255.    The semiconductor memory cell is an ----- R-S Flip flop.

I] Unclocked ii] Clocked iii] Edge triggered iv] None

256.    The semiconductor memory cell is fabricated with-----

I] Register ii] Capacitor iii] Transistor iv] None

257.    ...... Technology is used in fabrication of main memory

I] Bipolar ii] TTL gates iii] MOS Technology iv] None

258.    Static MOS cell stores information-----

I] Indefinitely as long as power applied.

Ii] For short time, must be refreshed.

Iii] None Iv]

259.    Dynamic Memory cell uses.........

I] TTL gate ii] Charged Capacitor iii] Register iv] None

260.    Which memory cell requires external circuitry I] Static ii] Dynamic iii] Ram iv] ROM

261.    SMAC mean------

262.    SMAC is --

I] Personnel Computer ii] Computer for Simulation Iii / Hypothetical Computer iv] None

263.    .........hold address of word in memory

a] MAR b] MDR c] MBR d] MVB

264.    ........hods data of word in memory.

a] MAR b] MDR c] MBR d] MVB

265.    What is MBR.

266.    Reading from and writing into memory id signaled by A] Read/Write signal b] So & S1 c] ALE d] None

267.    Read/Write signal is sent by..........

A] CPU b] ALU c] Computer d] NOne

268.    If the memory location is to be read CPU places address in.....

a] MAR b] MDR c] MBR d] MVB

269.    If the datum is to be written into memory then CPU places it in

a] MAR b] MDR c] MBR d] MVB

270.    General Purpose register built with ...

a] TTL b] High Speed buffers c] Logic gates d] DGA

271.    Explain instruction format of SMAC.

272.    Negative numbers are stored in..

A] Binary form b] 1s Complement c] 2s Complement d] None

273.    What is function of Multiplier Quotient register.

274.    What is function of status register.

275.    What is function of carry bit.

276.    What is function of Overflow bit.

277.    What is function of Zero bit.

278.    What is function of Negative bit.

279.    What is function of Positive bit.

280.    Explain format of status register.

281.

282.    IC stands for : Integrated Circuits

283.    SSI means : Small scale integration.

284.    MSI : Medium scale Integration.

285.    LSI : large scale Integration.

286.    VLSI : Very large scale integration.

287.    SLSI : Super large scale integration.

288.    First 4 bit microprocessor was designed by : Intel.

289.    Which is first 4 bit microprocessor : Intel 4004

290.    Which is first 4 bit microprocessor : Intel 8008

291.    Which are the microprocessors designed in first generation : Intel 4040 ,Toshiba 3472

292.    Which are the microprocessors designed in second generation : Intel 8048,

293.    Which are the microprocessors designed in Third generation : Intel 8086,

294.    Which are the microprocessors designed in Fourth generation :

295.    What is System bus?

296.    What is data bus?

297.    What is address bus?

298.    ALU stands for :.

299.    LED : Light Emitting diode

300.    CRT : Cathode ray tube

301.    Why registers are used in microprocessors.

302.    Enlist several registers used in microprocessor.

303.    Bi-direction bus is :

304.    Uni-Directional bus are :

305.    How many address lines in 8085 microprocessor.

306.    What is function of Instruction register.

307.

What is function of Instruction decoder.

308.

What is function of accumulator.

309.

Status register is also called as .. ..Flags

310.

What are Function of status register.

311.

What is function of Program Counter.

312.

What is function of Stack Pointer.

313.

What is function of Temporary register.

314.

What is HLDA ? Explain Function.

315.

What is HOLD ? Explain Function.

316.

What is SID ? Explain Function.

317.

What is SOD ? Explain Function.

318.

What is ALE ? Explain Function.

319.

What is IO/M ? Explain Function.

320.

What is Vcc ? Explain Function.

321.

What is Vss ? Explain Function.

322.

What is RD ? Explain Function.

323.

What is WR ? Explain Function.

324.

What is S0 & S1 ? Explain Function.

325.

What is x1-x2 ? Explain Function.

326.

What is INTR ? Explain Function.

327.

What is INTA ? Explain Function.

328.

CR stands for .

i. Control Register ii. Control Room iii. Carriage return iv. None

329.    Microprocessor was invented by :

a. Charles Babbage b. Grahm bell c. Marcian E Huff d. Bill gates

330.    Mnemonics are used in

a. High level language b. Middle level language c. Assembly level language d. Machine level lang.

331.    The program written in any particular computer language is known as : a. Source code b. Object code c. Intermediate code d. Assembly code

332. The language which is readily understood by the computer system is a. Low level b. Assembly c. Middle level d. High level e. None

334.

BCD stands for

335.

Decimal Number system contains digits.......

336.

Decimal position values has power

337.

Binary position values has power ....

338.

Binary number system contains digits

339.

Octal position values has power ..

340.

Octal number system contains digits..

341.

Hexadecimal position values has power ..

342.

Hexadecimal number system contains digits

Question 2 Answer in One Line

1)    What is computer

2)    What are the basic 3 part of the computer .

3)    What is memory cell

4)    What is volatile memory

5)    What is non-volatile memory

6)    What is memory

7)    List the types of computer

8)    How many disk are present in one hard disk ?

9)    How many generations are present at this time ?

10)    What is i/p device

o/p device

What is the purpose of ALU unit in CPU ?

11

12

13

14

15

16

17

18

19

20 21 22

23

24

25

26 27


List the different types of scanner What is impact printer.

What is non-impact printer.

List the different input devices.

List the different output devices.

List any five secondary storage decives/memory. What is algorithm?

Give the defination of flow chart.

What is program What is compiler What is assembler What is interpreter What is hardware What is software

List the symbols used for flowchart

What are the different programming languages

List the 3 translators name

What is computer network

What is LAN

What is WAN

What is MAN

What is internet

List various transmission medias?

What is operating system What is RAM

How many bits forms 1 byte?

What is system software?

What is application software?

List the different types of keys present on keyboard?

What is QWERTY keyboard?

What is EAPROM?

When we use the secondary memory?

It is more suitable to use pen drive rather than floppy? Why. What is the longform of MICR scanner.

List the topologies of computer network.

List the different types of operating system.

What are the binary digits?

When the first generation introdced?

At which time second generation developed.

In which year third generation introduce.

What is printer?

Define analog computer.

Give the defination of digital computer.

Define bit.

What is Bug?

What is Bus?

58)    Which type of printer having superior print quality?

59)    Define on-line devices.

60)    Whats the meaning of off-line devices?

61)    Explain or give the meaning of parity bit?

62)    Which was the electronic componant used in first generation computer?

63)    Give the name of electronic compocnant that was used in development of the second generation of computer.

64)    From which electronic component the third generation computers was developed?

65)    What is multiprocessing operating system?

66)    Give the name of any 3 system software.

67)    Give the name of any 3 application software.

68)    What is the alternate name to BCD code ?

69)    How to obtain BCD code ?

70)    How to converte decimal number into excess 3 code ?

71)    What is the long form of ASCII code ?

72)    What is logic gate.

73)    List the basic gates.

74)    What is OR gate.

75)    What is AND gate.

76)    What is NOT gate.

77)    What are the derived logic gate.

78)    How to build derived gate.

79)    List out the derived logic gate.

80)    How many derived logic gates are available?

81)    What is NOR gate.

82)    What is NAND gate.

83)    What is XOR gate.

84)    What is X-NOR gate.

85)    What is even parity.

86)    What is odd parity.

87)    List out the basic lows of booledn algebra.

88)    State the first De-morgans theorem.

89)    State the second De-morgans theorem.

90)    How many universal gates? List out them.

91)    What are the basic rules of binary addition?

92)    What are the basic rules of binary substraction?

93)    How to obtain 1st complement.

94)    How to obtain 2nd complement.

95)    What is half adder?

96)    What is full adder?

97)    Whats the meaning of multplexer.

98)    Give the meaning of 2 to 1 line multiplexer

99)    Give the defination of 4 to 1 line multiplexer.

100)

.What 8 to 1 line multiplexer.

101)

What is Decoder?

102)

What is Encoder?

103)

Define flip-flop.

104)

What register.

105)

What is shift register.

106)

What is clocked D flip-flop.

107)

Give the four basic types of shift register?

108)

What is the basic element of semiconductor mamory?

109)

Sequential access memory.

110)

What is the meaning of PROM?

111)

What is EEPROM?

112)

What is EPROM?

113)

What is J-K flip-flop?

114.

Enlist input devices?

115.

Enlist output devices?

116.

Define - impact and non-impact printer?

117.

Define - Algorithm and flowchart?

118.

Explain software with their types?

119.

what is application software? Enlist them?

120.

what is system software ? enlist them?

121.

what is hardware? Enlist hardware components?

122.

Define flowchart, draw any two flowchart symbols?

123.

Define compiler and interpreter

124.

Explain central processing unit.

125.

Explain first generation of computer.

126.

Explain second generation of computer.

127.

Explain third generation of computer.

128.

Explain fourth generation of computer.

129.

Explain fifth generation of computer.

130.

Describe unit of storage in detail.

131.

Define bit, byte, nibble, word.

132.

Explain speed characteristics of computer

133.

Explain accuracy characteristics of computer

134.

Explain diligence characteristics of computer

135.

Explain versatility characteristics of computer

136.

Explain analog computer.

137.

Explain digital computer.

138.

Explain hybrid computer.

139.

Explain micro computer.

140.

Explain mini computer.

141.

Explain mainframe computer.

142.

Explain super computer.

143.

what is primary memory.

144.

what is secondary memory.

145.

Describe RAM.

146.

Describe ROM.

147.

Describe PROM.

148.

Describe EPROM.

149.

Describe EAROM.

150.

Explain pen drive.

151.

Explain zip drive.

152.

what is lower level language,enlist LLL.

153.

what is middle level language ,enlist them.

154.

what is higher level language,enlist them.

155.

what is 4 GL,enlist them.

156.

what are the advantages of computer network.

157.

what do you mean by LAN.

158.

what do you mean by WAN.

159.

what do you mean by MAN.

160.

Differentiate LAN & MAN.

161.

Differentiate LAN & WAN.

162.

Differentiate WAN & MAN.

163.

What do you mean by Bus Topology.

164.

What do you mean by Ring Topology.

165.

What do you mean by Star Topology.

166.

What do you mean by Tree Topology.

167.

Differentiate between Bus & Star Topology.

168.

Differentiate between Bus & Ring Topology.

169.

Differentiate between Bus & Tree Topology.

170.

Differentiate between Ring & Star Topology.

171.

Differentiate between Tree & Star Topology.

172.

Differentiate between Ring & Tree Topology.

173.

Enlist functions of operating system.

174.

what is operating system?Enlist them.

175.

Describe Twisted wire pair cable.

176.

Describe fiber optic cable.

177.

Explain 1s & 2s compliment.

178.

Explain half adder?

179.

Explain full adder?

180.

Describe AND gate

181.

Describe OR gate

182.

Describe NOR gate

183.

Describe NAND gate

184.

Describe NOT gate

185.

Describe XOR gate

186.

Explain D-flip-flop.

187.

Explain JK-flip-flop.

188.

Explain SR flip-flop.

189.

Explain flip-flop.

190.

what is encoder.

191.

what is decoder.

192.

what is multiplexer.

193.

what is demultiplexer.

194.

what is shift register.

195.

Describe semiconductor memory cell.

196.

Explain instruction format of Assembly language programming

197.

Explain working of ALE and S0,S1 pins of 8085.

198.

Explain working of HLDA and HOLD pins of 8085.

199.

Explain working of RD & WR pins of 8085.

200.

Explain working of AD0 to AD7 pins of 8085.

201.

Explain working of A0 to A7 pins of 8085.

202.

what is interrupt? Enlist different interrupts in 8085.

203.

what do you mean by status flag? List different flags in 8085.

204.

Describe any two interrupts in 8085.

205.

what is instruction? Explain any 2 instructions in 8085.

206.

Enlist different registers used in 8085.

207.

Draw timing & control unit of 8085.

208.

Explain ASCII, BCD,EBCDIC.

209.

what do you mean by 2s compliment.

210.

what is use of stack in 8085.

211.

explain significance of program counter and accumulator in 8085

212.

Describe truth table of AND gate.

213.

Describe truth table of OR gate.

214.

Describe truth table of NOR gate.

215.

Describe truth table of NOT gate.

216.

Describe truth table of NAND gate.

217.

Describe truth table of EXOR gate.

218.

Describe Dos operating system.

219.

Describe Windows operating system.

220.

Describe Unix operating system.

221.

Describe Linux operating system.

222.

Describe Windows-vista operating system.

223.

Why there is need of operating system.

1)    Give the history of computer.

2)    Explain the generations of computers.

3)    List & explain the types of computer.

4)    special purpose & General purpose computer.

5)    Explain Analog Digital & hybrid computer.

6)    Explain micro computer .

7)    Explain in brief mini computer.

8)    Explain in brief maiframe computer.

9)    Explain the super computer.

10)    Explain the concept of memory cell.

11)    Explain in brief primary memory.

12)    What is Rom? Describe its various types.

13)    What is secondary memory? Explain Floppy Disk.

14)    Explain Hard disk.

15)    Explain magnetic tape.

16)    Explain in brief the concept of zip drive.

17)    Give the description of pen drive.

18)    Explain compact Disk.

19)    Describe the concept of DVD.

20)    Write a short note on Keyboard.

21)    Write a short note on mouse.

22)    Explain scanner.

23)    Describe web camera.

24)    Draw neat labeled block diagram of computer system& Explain.

25)    What is impact printer? Explain any one of them.

26)    Write a note on Dot matrix printer.

27)    Write a short note on line printer.

28)    What is non- impact printer? Explain plotter

29)    Explain inkjet printer.

30)    Explain Laser printer.

31)    What is algorithem. ? Give the algorithim & flow chart of addition of first ten (10) number start from 1.

32)    What is flow chart ? Give the symbols used for flowchart.

33)    List & explain the symbols for flowchart.

34)    Explain the following term.

1) compiler 2) assember

35)    Explain the concept of software 7 Hardware.

36)    Write a algorithm & flowchart for factorial of any number.

37)    Write a Algorithm & Draw flowchart for palindrome number

38)    Explain the term flowchart with suitable example.

39)    Draw a flow chart of revere number

40)    What is algorithm. Explain with suitable example

41)    Explain machine level language

42)    Explain assembly language

43)    Explain High level language

44)    Explain 4GL [4th generation language]

45)    What is computer network? Give the advantages of computer network

46)    Give the difference between RAM and ROM

47)    Differentiate between primary and secondary memory

48)    What is Internet ? Explain Tree Topology

49)    Explain the concept of LAN and WAN

50)    Give the differnce between WAN and MAN network

51)    Explain the different topologies of computer network

52)    Explain Bus and star topology

53)    Explain Ring and Bus topology

54)    Explain star and Tree topology

55)    Describe the twisted wire pair

56)    Explain optical-fiber transmission media

57)    Explain wireless transmission media

58)    Explain need of operating system

59)    Give the functions of operating system

60)    Differentiate between twisted wire pair and optical fiber

61)    Differentiate between DOS and windows

62)    Differentiate between DOS and linux

63)    Differentiate between windows and windows-vista

64)    Explain BCD code

65)    Explain Excess 3 code

67)

Explain Gray code in brief ?

68)

Describe ASCII code in detail .?

69)

Explain concept of +ve & -ve logic and give the definition of logic gate.?

70)

Explain Basic gates ?

71)

Describe OR gate in detail with construction & working ?

72)

Explain AND gate in detail with construction & working?

73)

Explain NOT gate in detail with construction & working?

74)

Explain shortly Derived logic gates?

75)

Explain NOR gate?

76)

Describe NAND gate?

77)

Write short note on X-OR gate?

78)

Write short note on EX-NOR gate?

79)

Gives list & Basic laws of Boolean Algebra?

80)

Explain 1s compliment &2s compliment?

81)

Explain 1s compliment subtraction?

82)

Describe Half adder?

83)

Describe Full adder?

84)

Explain in detail 2s compliment subtraction?

85)

Explain serial in -serial out shift resister?

86)

Explain serial in- parallel out shift register?

87)

Explain Parallel in serial out shift register?

88)    Explain parallel in-Parallel out shift register?

89)    What is flip flop? Explain-S flip flop with truth table?

90)    How can a R-S flip-flop be constructed using NOR gate? Explain its working with truth table?

91)    How can a R-S flip-flop be constructed using NAND gates? Explain its working with truth table?

92)    Write short note on J-K flip-flop?

93)    Explain the concept of memory organization?

94)    Draw a neat labled diagram of 8085

95)    Explain & draw pin diagram of 8085

96)    Explain semiconductor memory cell?

97.    Convert(725.25)8 to its decimal, binary and hexadecimal equivalent.

98.    Convert (11001011.01110)2 into decimal.

99.    Convert following numbers to hexadecimal.

(360)8 (2262)10 (10011.1101)2 (10.1)2

100.    Convert following numbers to its octal equivalent.

(1100101011.1110)2 37.2910 672 H

101.    Convert (268.75)10 to binary ,octal, hexadecimal A92H

102.    What is radix used in case of decimals, binaries, octal, hexadecimals.

103.    What is advantages of octal& hexadecimal numbers over binaries.

104.    What do you mean by sign magnitude form of representation.

105.    Determine the base x : (211)x = (152)8

106.    Using 2s complement method , perform (156)10-(99)10 (16)10-(25)10

107.    Perform Subtraction using :

a) 1s compliment method b) 2s Complement method

(11010)2 - (10000)2 (1000100)2 - (1010100)2

108.    Explain the meaning of the term memory dump.

109.    Find the decimal equivalent of the following binary numbers :

a. 1101011 b.11010 c.10110011 d.11011101 e.1110101 f.1000 g.10110001100

110.    Find the octal equivalent of the following binary numbers :

a. 1101011 b.11010 c.10110011 d.11011101 e.1110101 f.1000 g.10110001100

111.    Find the Hexadecimal equivalent of the following binary numbers : a. 1101011 b.11010 c.10110011 d.11011101 e.1110101 f.1000 g.10110001100

112.    Convert following numbers to decimal : a. 1101102 b. 25736 c. 2A3B 16 d.12349

113.    Convert following decimal numbers to binary :

a. 435 b. 1694 c. 32 d. 135

114.    Find decimal equivalent of following numbers

a. 111.012 b. 1001.0112 c. 247.65 8 d,A2b.D416

115.    Subtract 01010 from 10000

116.    Subtract 01010 from 10000

117.    Subtract 011011 from 110111

118.    Subtract 2510 from 50 10using complementary method.

119.    Subtract 01010 from 10000 using complementary method.

120.    Multiply binary numbers 1100 and 1010.

121.    Divide 11001 by 101

122.    Describe positive and Negative logic?

123.    Explain OR gate - Symbol , Truth table, Logic expression

124.    Explain AND gate - Symbol , Truth table, Logic expression

125.    Explain NAND gate - Symbol , Truth table, Logic expression

126.    Explain NOR gate - Symbol , Truth table, Logic expression

127.    Explain Ex-OR gate - Symbol , Truth table, Logic expression

128.    Construct NOT, AND, OR gates using NAND gate.

129.    Construct NOT, OR, AND gate using NOR gate.

130.    Explain applications of Ex-OR gate in detail.

131.    Construct logic circuit diagram for half adder using only NAND gate.

132.    Construct logic circuit diagram for half adder using only NOR gate.

133.    Why are combinational circuits more frequently constructed with NAND and NOR gate than with AND,OR and NOT gates ?

134.    Construct a logic circuit diagram for the exclusive OR function using only NOR gates.

135.    Construct a logic circuit diagram for the exclusive AND function using only NAND gates.

136.    A logic system has three inputs A,B,C .It generates output 1 only when A=0,B=1,C=0 or

A=1,B=1,C=0. Design a combinational circuit for this system.

Prove the following using rules of Boolean algebra, OR simplify

137.    A+BC = (A+B)(A+C)

138.    A+AB = A A(A+B) = A

139.    A+AB = A+B

140.    ABC+ABC+ABC = A(B+C)

141.    ABC+ABC+ABC+ABC+ABC = A+ABC

142.    ABC+ABC+ABC+ABC+ABC = AB+AB

143.    (A+B+C)(A+B+C) = A+BC+BC

144.    AB+ABC+AB+ABC = B+AC

Draw logic diagram for following Boolean expression

145.    AB+CD

146.    Y= AB+(B+C)

147.    Y= (A+B)(B+C)

148.    Y=(A+BC)(AC+B)

149.    Y=ABC+ABC+ABC+ABC

150.    Explain 1s complement subtraction ( Subtract smaller from larger)

151.    Explain 1s complement subtraction ( Subtract larger from smaller)

152.    Explain steps for 2s complement subtraction with an example.

153.    State and prove the two basic De Morgans theorems.

154.    Explain working of S-R flip flop using NAND gate .

155.    Explain working of D-flip flop .

156.    Explain working of J-K flip flop.

157.    Explain working of Edge triggered J-K flip flop

158.    Explain with block diagram Multiplexer

159.    Explain with block diagram 2 - 1 line multiplexer .

160.    Explain with block diagram demultiplexer .

161.    Explain with block diagram 1-2 line demultiplexer .

162.    Describe advantages and disadvantages of multiplexer and demultiplexer. 163 Describe block diagram of digital system

164.    Octal to Binary Encoder

165.    Decimal to BCD Encoder

166.    3-8 Decoder or Binary to Octal decoder.

167.    Describe characteristics of physical storage device.

168.    Explain memory with block diagram.

169.    Differentiate Volatile & Non-Volatile memory.

170.    Describe working of magnetic core with diagram.

171.    Differentiate static and Dynamic MOS cell.

172.    What is MOS Cell ? Explain with block diagram construction of Dynamic MOS cell.

173.    Explain working of static memory cell.

174.    Describe , how information is written in memory cell.

175.    Describe , how information is Read in memory cell.

176.    Explain in detail status register.

177.    Describe in detail CPU register.

178.    How execution of instruction is performed.

179.    Enlist the steps - sequence of operation carried out during instruction fetch cycle.

180.    Enlist the steps - sequence of operation carried out during instruction execution cycle.

181.    Enlist instruction of SMAC.

182.    Explain different generations of Microprocessors.

183.    What is Microprocessor, explain in detail.

184.    What is Micro-computer ? Explain structure of Microprocessor based system.

185.    Enlist function - CPU of Microprocessor.

186.    Explain with block diagram ALU.

187.    Describe working of Memory.

188.    Explain in detail following parts of microprocessor ALU , Registers, Control Unit.

189.    Explain Machine Cycle of 8085

190.    Explain commutative & associative laws.

191.    Explain distributive & absorption laws.

192.    simplify (A+B+C)(A+B+C)

193.    Draw logic diagram for following

a. AB+CD B. Y=AB+(B+C)

194.    What is demorgans theorem. ?

195.    Differentiate Higher & Middle level language.

196.    Explain Multiprogramming operating system.

197.    Explain time sharing operating system.

198.    Explain multiuser operating system.

199.    Explain Multitasking opearating system.

200.    Explain different generation of computers.

6 Marks Questions

1.    What is algorithm? Write the algorithm to find the average number of Ovels in passage.

2.    Expalin the method problem solving using computers.

3.    write a short note on flowchart.

4.    Draw a block diagram of a computer. Explain the function of each of the blocks.

5.    Formulate an algorithm to find the average number of occurrences of each of the letters Q,X,Y,Z in an English passage.

6.    Obtain an algorithm and flowchart to find the average number of letters in each sentences in an English passage.

7.    Obtain an algorithm and flowchart to find factorial number.

8.    Obtain an algorithm and flowchart to find Palindrome or not.

9.    Obtain an algorithm and flowchart to find reverse number of given number.

10.    Obtain an algorithm and flowchart to find reverse number of given string.

11.    Explain the term data in machine readable form.

12.    Describe the operation of a floppy disk reader.

13.    wrte a short note on floppy disk.

14.    what is the difference between a line printer and a character printer?

15.    what is the difference between a drum printer and a chain printer?

16.    what is the advantage of a chain printer as compared to a drum printer?

17.    what is the difference between a an impact printer and a non-impact printer? Which is capable of higher speed?

18.    what is the advantage of an inject printer compared to a dot matrix printer?

19.    what is the advantage of microfilm output?

20.    Write a short note on line printer.

21.    Write a short note on chain printer.

22.    Write a short note on drum printer.

23.    Write a short note on line printer.

24.    Write a short note on Vedio Display Unit(VDU).

25.    Write a short note on Dot matrix printer.

26.    Explain in briefly Optical Character Recognition(OCR).

27.    Explain in briefly Bar Coding.

28.    Explain in briefly Serial printer.

29.    what is the difference between a Serial Printer and Chain printer.

30.    Write a short note on Plotters.

31.    Explain in briefly Laser Printers.

32.    What is Graphical Display Device?

33.    What is the main application of magnetic ink character readers?

34.    What is the main application of an Optical character reader?

35.    What is an Optical Scanner? Explain how it works.

36.    What is a speech input unit?What are its uses?How many types of speech input units are available?

37.    What is a speech output unit? What are its applications?

38.    what is the difference between a Primary memory and Secondary memeory?

39.    Explain in briefly the any three types of Primary memory.

40.    Explain in briefly the any three types of Secondary memory.

41.    What is harddisk?

42.    What is magnetic tape?Explain is working.

43.    What is the purpose of the main memory in a computer?

44.    What are the main characteristics of a memory cell?

45.    what is Volatile memory?

46.    What is Non-Volatile memory?

47.    what is the difference between a volatile memory and a Non-volitile memory?

48.    Explain the magnetic hard disk.

49.    Write a short note on CDROM(Compact Disk Read Only Memory).

50.    what is the difference between a ROM and RAM?

51.    Write a short note on memory cell.

52.    Explain in briefly register?

53.    Draw a block diagram of a memory which has 4 word 3 bit per word memory and explain it.

54.    Write a short note on Serial Access Memory.

55.    What is the distinction between the time of a memory and its access time?

56.    What is a Read Only Memory? Comment Is a ROM a Random Access Memory?

57.    Explain the operation of a controlled switch.

58.    Explain the operation of a flip-flop.

59.    Explain how information is written on and read from magnetic surfaces.

60.    Explain how data is organized on a floppy disk.

61.    Explain how data is organized on a hard disk.

62.    What are the main difference between a floppy disk and a hard disk?

63.    What is a CDROM? In what way is it different from hard disk?

64.    How data recorded on a CD ROM ? How is it read?

65.    What is a DAT? When is it used?

66.    Write a short note on Pen Drive.

67.    Write a short note on Zip drive.

68.    Write a short note on DVD.

69.    What is flowcharts?Explain different symbols used in flowcharts.

70.    Define Algorithm,Flowcharts,Program ,Compiler,Interpreter,Hardware

71.    What is software?Explain System and Application software.Enlist System and Application software.

72.    Write an algorithm to find Largerst from array of n elements.

73.    Write an algorithm to find Smallest from array of n elements.

74.    Write an algorithm to find Second Largerst from array of n elements.

75.    Write an algorithm to find Second smallest from array of n elements.

76.    Write an algorithm to find Second Largerst,Second Smallest from array of n elements.

77.    Write an algorithm to find transpose of given matrix of order m*n.

78.    Write an algorithm to find Addition of two matrices of order m*n.

79.    Write an algorithm to find Subtraction of two matrices of order m*n.

80.    Write an algorithm to find Multiplication of two matrices of order m*n.

81.    Write an algorithm to check whether the given number is prime or not.

82.    Write an algorithm to find sum of following series 1!+2!+-------------+n!.

83.    Describe LAN ,WAN and MAN

84.    Differentiate Bus and Star topology.

85.    Differentiate Bus and Tree topology.

86.    Differentiate Bus and Ring topology.

87.    Differentiate Ring and Star topology.

88.    Differentiate Tree and Star topology.

89.    Differentiate Ring and Tree topology.

90.    What is Operating System?Enlist the functions of Operating System.

91.    What is Operating System?What is the need of Operating System?

92.    Differentiate Windows and Linux Operating System.

93.    Explain Windows -Vista Operating System.

94.    Differentiate Higher level and Middle level language.

95.    Explain the advantages of higher level language.

96.    Explain the disadvantages of Assembly language.

97.    Expalin the disadvantage of machine level language.

98.    Write short note on Twisted Wire Pair cable.

99.    Write short note on Fiber optic cable.

100.    What are the advantages of computer network.

101.    Draw block diagram of Generic Microprocessor.

102.    Explain different parts of microprocessor in detail.

103.    Draw Pin diagram of 8085 Microprocessor.

104.    Write SMAC program for, addition of two numbers.

105.    Write SMAC program, for subtraction of two numbers.

106.    Write SMAC program, for multiplication of two numbers.

107.    Write SMAC program, for division of two numbers.

108.    Write SMAC program, for square of given number.

109.    Write SMAC program, for factorial of given number.

110.    Write SMAC program, for GCD of given two number.

111.    Write SMAC program, for LCM of given two number.

112.    Write SMAC program, for finding largest from 5 numbers.

113.    Write SMAC program, for finding smallest from 5 numbers.

114.    Explain half adder - symbol, circuit diagram, truth table.

115.    Explain full adder - symbol, ckt diagram, truth table.

116.    Explain in detail shift register.

1.







Attachment:

( 0 Votes )

Add comment


Security code
Refresh

Earning:   Approval pending.
You are here: PAPER North Maharashtra University 2008 B.Sc Computer Science FY 1 - Question Paper