Amrita Vishwa Vidyapeetham 2011 B.Tech Mechanical Engineering Engineering drawing-1 periodical test , - Question Paper

AMRITASCHOOLOFENGINEERING,BENGALURU
Department of mechanical engineering
Periodical test
Subject Code: MEC 181 Semester: I
Subject: Engineering Drawing-1 Section: F-1
Duration: two hrs Max.Marks:50

ans all the ques.

1.Draw the projections of the subsequent points on the identical reference XY line and state the quadrants in which they lie.
E - 35 mm above HP& on VP
F - 30 mm beneath HP &on VP
G - On HP & 25 mm behind VP
H - On HP & 30 mm in front of VP [10 Marks]

2. A line AB 80 mm has its end A 20 mm above the HP and 30 mm in front of VP. It is inclined at 30 degrees to HP and 45 degrees to VP. Draw the projections of the line and obtain apparent lengths and apparent inclinations.[10 Marks]

3. A regular hexagonal lamina of side 25 mm is lying in such a way that 1 of its corners on HP while the opposite corner on which it rests is on VP. If the lamina makes 60 degrees to HP. Draw the projections of the lamina.[15 Marks]

4. Draw the projections of a circular plate of negligible thickness of 50 mm diameter resting on HP on a point A on the circumference, with its plane inclined at 45 degrees to HP and the top view of the diameter passing through the resting point makes 60 degrees with VP.[15 Marks]

Earning:   Approval pending.