Rajiv Gandhi Proudyogiki Vishwavidyalaya 2010 B.E Mechanical Engineering MODEL - , , Bhopal, Mechanical Engg. - Question Paper

QUESTION(1) ans the subsequent.
1. What is difference ranging from saturated liquid, saturated vapor and superheated vapor?
2. What happens to temperature and pressure during boiling process?
3. Which process needs more energy, complete vaporization of 1kg of saturated liquid at 1bar pressure or complete vaporization of 1kg of saturated liquid at eight bar pressure? Why?
4. Which process needs ore energy, complete vaporization of 1kg of saturated liquid at 100oC temperature complete vaporization of 1kg of saturated liquid at 200oC temperature? Why?
QUESTION(2) Differentiate between:
1. Closed and open systems
2. Adiabatic and isothermal process
3. Heat and temperature
4. Isolated and closed systems
5. Intensive and extensive properties
6. Heat and work
QUESTION(3)
A tank whose quantity is unknown is divided into 2 parts by a separating partition. 1 side of the tank contains 0.01 m3 of refrigerant 134a that is saturated at 0.8 MPa, while the other side is evacuated. The partition is removed and tank fills the entire quantity of the tank. If the final state of the refrigerant is 25 oC and 200 kPa, determine the quantity of the tank.
QUESTION(4)
(a) Air at 4.18 kg/m3 enters a nozzle that has an inlet to exit area ratio of 2:1 with a velocity of 120 m/s and leaves with 380 m/s. Determine the density of the air as it leaves the nozzle.
(b)A vacuum gage connected to a chamber reads 24 kPa at a location where atmospheric pressure is 92 kPa. Determine the absolute pressure in the chamber.
© Determine change in the internal energy change and the enthalpy of nitrogen as it is heated from 600 K to 1000 K using
(i) constant value of Cp and Cv
(ii) avg. value of Cp and Cv
QUESTION(5) Complete the table

T,oC P,kPa u,kJ/kg phase
400 1825
220 Saturated vapor
190 2000
4000 3040

Earning:   Approval pending.