Maharashtra State Board of Technical Education 2009 Certification MS-CIT Bank Set 18 - Question Paper

1. An individual dot that form images on a monitor is called as
1) Point
2) Pixel
3) Spot
4) Picture

2. Before attaching any new input of output device to a computer it is advisable to 1st properly switch off the computer and begin it again after attaching the device.
1) TRUE
2) FALSE

3. Colour monitors cost more than monochrome monitors.
1) TRUE
2) FALSE

4. Daisy wheel printers are predominantly used today.
1) TRUE
2) FALSE

5. Depending on the function to locate the desire point the mouse is also called
1) Locator
2) Displayed
3) Mover
4) Key

6. Direct entry method creates ____ data that can go directly to the CPU to process on it.
1) Machine readable
2) Alphanumeric
3) Human readable
4) Numeric

7. Drum scanners provide much better quality of scanned image than most flatbed Scanners
1) TRUE
2) FALSE

8. Fax machine that scan the images of a document to be sent is called
1) Information transmission machine
2) Fax transmission machine
3) Format transmission machine
4) Facsimile transmission machine

9. How direct entry input device is easy than keyboard entry input device?
1) It enter machine readable data directly
2) It enter human readable data directly
3) It enter letters, numbers, symbols directly
4) It enter data using keyboard

10. How ink jet plotter plots the charts, maps?
1) By Laser beam
2) By spraying droplets of ink
3) By using ribbon
4) By moving pen

11. How many colours are use in Direct imaging plotter to plot images?
1) One
2) Two
3) Three
4) None of the above

12. How many pages per minute print by using Personal Laser printer?
1) 1
2) 2
3) 3-4
4) 4-6

13. How many parts of keys are available on traditional keyboard?
1) 3
2) 4
3) 5
4) 6

14. How many users use personal laser printer at a time?
1) 1
2) 2
3) 3
4) 4

15. How many words identifies by the Dragon Dictate voice recognition system
1) 10,000
2) 20,000
3) 30,000
4) 40,000

16. Hue, saturation and brightness are the basic properties with which any colour can be defined.
1) TRUE
2) FALSE

17. If the brightness level of a CRT monitor is kept at highest level the life expectancy of the monitor increases.
1) TRUE
2) FALSE

18. If the thickness of line drawn is very small, the lines disappear when the size of the image on the screen is very small.
1) TRUE
2) FALSE

19. Images produced by paint programs are bitmap kind.
1) TRUE
2) FALSE

20. In a bitmap image a every line is drawn as per a mathematical formula.
1) TRUE
2) FALSE

21. In a laser printer the toner is fixed to the cartridge by means of a heated drum
1) TRUE
2) FALSE

22. In touch screen the beam of _____ light is used to choose actions or commands by touching the screen with a finger?

Earning:   Approval pending.