Maharashtra State Board of Technical Education 2009 Certification MS-CIT Bank Set 24 - Question Paper

1. A network can be configured is called the network's
1) Host
2) Server
3) Topology
4) Node

2. A workstation can be ___________________
1) Dumb terminal
2) Nerwork terminal
3) Standalone system
4) All of the above

3. Choose fasted ways of transmission of data
1) Serial Data Transmission
2) Parallel Data Transmission
3) Both are identical
4) None of these

4. Communications speed is typically measured in
1) Byte Per 2nd
2) Bit Per 2nd
3) Second Per Bit
4) Second Per Byte


5. Computer typically send and receive
1) Digital Signal
2) Analog Signal
3) Both A & B
4) None of these

6. Coxial cable has over ____ times the transmission capacity of twisted pair.
1) 100
2) 20
3) 60
4) 80

7. Demodulation is the process of
1) Communication
2) Convertion of Data
3) Converting from Digital to Analog
4) Converting from Analog to Digital

8. External modem connect to computer using
1) Parallel Port
2) Serial Port
3) Any 1 of A or B
4) None of these

9. Fiber-optic has over _________ times capacity of twisted pair.
1) 15000
2) 20000
3) 26000
4) 10000

10. For voice communications and data communications needed separate telephone lines.
1) option1
2) option2

11. If printer connected to a network is called
1) Client
2) Server
3) Host
4) Node

12. If the data storage device is connected to a network it is called a
1) Client
2) Server
3) Host
4) Node

13. Modem is
1) Converter of Data
2) Communicator ranging from Computer and Telephone line
3) Modulator-Demodulator
4) Convert the digital signal to analog signal and vice versa

14. Modulation is the process of
1) Communication
2) Conversion of Data
3) Converting from Digital to Analog
4) Converting from Analog to Digital

15. Names of serial port are
1) RS-232C Connector
2) Asynchronous
3) Communications Port
4) Both A and B
5) None of these

16. Select ascending order for speed unit (a ) mbps ( b) kbps (c ) bps (d ) gbps
1) D-A-B-C
2) D-A-C-B
3) C-B-A-D
4) C-B-D-A

17. Select invalid node from provided beneath
1) Computer
2) Printer
3) Speaker
4) Scanner

18. Select invalid topology from provided beneath
1) Star Topology
2) Bus Topology
3) Hybrid Topology
4) Circle Topology

19. Select non communication channel
1) Coaxial Cable
2) Fiber-Optic Cable
3) Data Cable
4) Microwave


20. Select the speed of connection service by asending order ? (a) Digital subscriber line (b) T1 (c ) Cable modem (d) Dial-up service
1) C-A-B-D
2) D-B-A-C
3) B-A-D-C
4) None of these

21. Select the speed of connection service by desending order ? (a) Digital subscriber line (b) T1 (c ) Cable modem (d) Dial-up service

Earning:   Approval pending.