GITAM University 2007 B.E Electronics

College of Engineering
Gandhi Institute of Technology and Management, Visakhapatnam
(Affiliated to Andhra University)

B.E. (Electronics and Communications Engineering ) 2nd Year
Second Semester exams
(Autonomous Stream)

EC 227 Control Systems

Time: three Hours Max. Marks: 60

1. ans ques. No. one ( Part – A) and any 4 of the remaining 7 (Part – B)
2. All parts of a ques. must be answered in 1 place, otherwise they will not be valued.
3. Figures in the right hand margin indicate marks allotted.


PART – A

1. ans the subsequent. 10x2=20
a) elaborate the advantages of a closed-loop system?
b) Compare the terms ‘stability’ & ‘sensitivity’.
c) The impulse response of a system is e-0.2t. Determine the transfer function of the system.
d) How does the performance of an automatic control system is effected by a positive feedback signal.
e) State Mason’s gain formula.
f) describe ‘rise time’ and ‘settling time’.
g) elaborate the effects of adding poles and zeros to the transfer function?
h) State the advantages of frequency domain analysis.

i) What will happen if a zero is added in the forward path of a second-order system?
j) describe a series-parallel compensation.

PART – B

ans any 4 of the subsequent. If you attempt more than 4 questions, only the 1st 4 in order will be valued.

2. find the overall transfer function C/R from the signal flow graph shown: (10)

3. a) Determine the mathematical model for the system shown in the figure. (5)

b) Derive the transfer function of field controlled dc servomotor. (5)

4. Measurements conducted on a servomechanism show the system response to be
C(t)= one + 0.2 e-60t – 1.2 e-10t when subjected to a unit-step input.
a) find the expression for the closed-loop transfer function.
b) Determine the undamped natural frequency and damping ratio of the system. (10)
5. Sketch the root locus diagram for the feedback control system having the subsequent open-loop transfer function. presume that ‘K’ will take all positive values from 0 to .
G(s) =
(10)
6. Draw the Bode plot of a closed-loop system which has the open-loop transfer function.
G(s)H(s) =
Determine the maximum value of ‘T’ for system to be stable. (10)
7. Write short notes on the following:
a) Effect of derivative control on transient and steady state performance of f.B.control system. (5)
b) explain lead compensator. Sketch the Bode plot of a lead compensator and provide the design steps of a lead compensator. (5)

8. a) discuss Routh-Hurwitz criterion. (4)
b) Investigate the stability of the system with characteristic formula.
s5+2s4+24s3+48s2 – 25s – 50 = 0
Also obtain all the roots of this formula. (6)

Earning:   Approval pending.